Unimog Clutch Slave Cylinder. Fits the 406/416/419.
Installation Tip/Warning: When installing this cylinder MAKE SURE the piston is as far back in the bore as possible prior to adjustment. If the piston comes out of the bore DO NOT JUST FORCE IT BACK. Remove the boot and use a nylon "bone" and carefully clearance the seal lip as you put steady pressure on the piston. We have seen a number of customers incorrectly adjust, piston seal comes out of the bore, and when re-installed they damage the lip of the seal. We are no longer replacing the entire unit under warranty if the seal lip is damaged. We will have you send it back and we will install a new seal onto your unit.
New OEM part made by FTE.
Installation Tip/Warning: When installing this cylinder MAKE SURE the piston is as far back in the bore as possible prior to adjustment. If the piston comes out of the bore DO NOT JUST FORCE IT BACK. Remove the boot and use a nylon "bone" and carefully clearance the seal lip as you put steady pressure on the piston. We have seen a number of customers incorrectly adjust, piston seal comes out of the bore, and when re-installed they damage the lip of the seal. We are no longer replacing the entire unit under warranty if the seal lip is damaged. We will have you send it back and we will install a new seal onto your unit.
